One machine park for large, complex components
Heavy parts up to 50 tonnes – machined, measured and documented in-house. Explore the capacity, processes and equipment behind Nordmark’s production.
Technical capacity
Can Nordmark handle your component?
Large and complex components require more than available machine time. Size, geometry, weight, tolerances, measurement and documentation all affect the right production setup.
Nordmark’s capabilities help customers assess technical fit early in the project – before commitments are made.
Capabilities
Capabilities for demanding industrial components
Where size, geometry, tolerances and documentation raise the bar on both equipment and experience. Five core capabilities, one coordinated machine park.
CNC milling
Large-scale milling and boring of complex components across long travels, held to tight tolerances in steel and stainless. Multi-axis capacity handles demanding geometries and heavy workpieces from a single setup, keeping accuracy consistent from the first cut to the final surface.
Fermat WRF160H – 3
Floor-type boring mill for the largest, heaviest components.
- X 18,000 mm
- Y 8,500 mm
- Z 1,600 mm
- W 1,000 mm
Fermat WRF160H – 4
Floor-type boring mill for the largest, heaviest components.
- X 18,000 mm
- Y 8,500 mm
- Z 1,600 mm
- W 1,000 mm
FPT M-ARX
Heavy boring and milling of large, complex parts.
- X 12,000 mm
- Y 5,500 mm
- Z 1,500 mm
- W 900 mm
Fermat WRF150 – 2
Long-travel floor boring mill for oversized workpieces.
- X 11,800 mm
- Y 6,000 mm
- Z 1,500 mm
- W 1,000 mm
Fermat WRF150 – 1
Long-travel floor boring mill for oversized workpieces.
- X 8,000 mm
- Y 5,000 mm
- Z 1,500 mm
- W 1,000 mm
FPT Spirit
Boring and milling centre for complex geometries.
- X 6,000 mm
- Y 5,000 mm
- Z 1,500 mm
- W 900 mm
Colgar PRG 415
Plano-milling for tall, heavy components.
- X 4,000 mm
- Y 4,500 mm
- Z 2,500 mm
- W 900 mm
Colard PRG 415
Plano-milling for tall, heavy components.
- X 4,000 mm
- Y 4,500 mm
- Z 2,500 mm
- W 900 mm
FPT LEM
Compact boring and milling for smaller series.
- X 3,000 mm
- Y 2,000 mm
- Z 1,200 mm
- Control CNC
CNC turning
Turning of large-diameter, heavy components where concentricity and repeatability decide whether a part performs. Our lathes are built for stable, controlled cutting on long and heavy workpieces, with the rigidity to hold form on demanding materials.
Vertical turning centre
Large-diameter facing and turning of rings and flanges.
- Swing Ø 3,000 mm
- Height 2,000 mm
- Table Ø 2,500 mm
- Load 25 t
Heavy-duty horizontal lathe
Long-bed turning of shafts and rolls with steady-rest support.
- Swing Ø 1,200 mm
- Length 8,000 mm
- Bore 420 mm
- Load 12 t
CNC turning centre
Precision turning of medium components with live tooling.
- Swing Ø 800 mm
- Length 3,000 mm
- Bore 260 mm
- Load 6 t
Deep hole drilling
Specialised deep hole drilling for long, accurate bores from Ø30 mm, with straightness and surface finish maintained even at significant depths. Ideal for shafts, manifolds and components where the bore is as critical as the outer geometry.
Deep hole drilling machine
BTA and gun drilling for long, straight bores.
- Depth 4,000 mm
- Ø range 30–200 mm
- Length 8,000 mm
- Load 15 t
Deep hole boring line
Counter-boring and skiving for large internal diameters.
- Depth 6,000 mm
- Ø range 60–320 mm
- Length 9,000 mm
- Load 20 t
Twin-head drilling cell
Parallel drilling for repeatable multi-bore parts.
- Depth 2,500 mm
- Ø range 20–120 mm
- Length 5,000 mm
- Load 8 t
Surface treatment
Coating and finishing coordinated with machining and planned into the flow, so components leave protected and ready for assembly. We combine in-house preparation with a trusted network of treatment partners.
- Blasting and surface preparation
- Priming and painting to specification
- Corrosion protection systems
- Coating matched to machining tolerances
- Documented coating thickness and process
- Delivered ready for assembly
Quality
Measurement, inspection and documentation are built into production, not added at the end. Deviations are caught early, tolerances are verified against the drawing, and every component leaves with the documentation your team needs to sign it off with confidence.
WENZEL CMM
Coordinate measuring for full dimensional inspection and reporting.
- X 4,000 mm
- Y 3,800 mm
- Z 2,000 mm
- Accuracy ±5 µm
Laser tracker
Large-volume measurement and alignment across the floor.
- Range 80 m
- Accuracy ±15 µm
- Type Portable
- Use In-process
Surface & form testing
Roughness, hardness and geometry verified against the drawing.
- Roughness Ra / Rz
- Hardness HB / HV
- Form GD&T
- Output PDF report
The full machine list
Every machine, working envelope and crane capacity in a single datasheet – ready to share with your engineering team.
Contact
Ready to clarify your next project?
Send drawings or a short description. We will assess the requirements and clarify the next step.
Send us a message
"*" indicates required fields